- 0533 028 85 89
- Mr Tuncay
- 0535 472 80 92
- Mr Turabi
- 0553 512 21 50
- Kappadoor
Kappadoor Products
Kappadoor Products Are ISO CE Certified
Project Series
Case
It is made of 1.5 mm DKP sheet metal.
The case can be adjusted according to the desired dimensions.
Cases that are 20 cm or more will be custom made.
Frame surfaces and sills are wooden coated on DKP sheet. (Natural wood, lacquered, pvc . etc.)
Wing Type (Trapeze Section Wing)
Made of 0.90 mm + 0.90 mm = 1.8 mm DKP sheet.
Wing outer and inner surfaces are covered with wood on DKP sheet (natural wood, lacquer, pvc , etc.)
The inside of the wing is filled with rock wool or isoglass.
Standard mono block lock system is applied. Optionally , semi-central or central locking system is used.
3 fixed steel pins are used on the hinge side of the wing.
Concealed safety clamp.
304 stainless steel or special aluminum profile is opnionally used on the wing frame.
Wide –angle binoculars.
Standard accessory.
The case can be adjusted according to the desired dimensions.
Cases that are 20 cm or more will be custom made.
Frame surfaces and sills are wooden coated on DKP sheet. (Natural wood, lacquered, pvc . etc.)
Wing Type (Trapeze Section Wing)
Made of 0.90 mm + 0.90 mm = 1.8 mm DKP sheet.
Wing outer and inner surfaces are covered with wood on DKP sheet (natural wood, lacquer, pvc , etc.)
The inside of the wing is filled with rock wool or isoglass.
Standard mono block lock system is applied. Optionally , semi-central or central locking system is used.
3 fixed steel pins are used on the hinge side of the wing.
Concealed safety clamp.
304 stainless steel or special aluminum profile is opnionally used on the wing frame.
Wide –angle binoculars.
Standard accessory.
Pivot Series
Case
Made of 2mm galvanized steel
Ving
It is made of 1.2mm + 1.2mm monolithic galvanized steel Surface resistant to outdoor conditions (natural wood, stone surface etc.) Rock wool filling inside the sash
Central locking system Accessory is used according to special request Pivot hinge
Made of 2mm galvanized steel
Ving
It is made of 1.2mm + 1.2mm monolithic galvanized steel Surface resistant to outdoor conditions (natural wood, stone surface etc.) Rock wool filling inside the sash
Central locking system Accessory is used according to special request Pivot hinge
Natural Veneer Series
Case
It is made of 1.5 mm DKP sheet metal.
The case can be adjusted according to the desired dimensions.
Cases that are 20 cm or more will be custom made.
Frame surfaces and sills are wooden coated on DKP sheet. (Natural wood, lacquered, pvc . etc.)
Wing Type (Trapeze Section Wing)
Made of 0.90 mm + 0.90 mm = 1.8 mm DKP sheet.
Wing outer and inner surfaces are covered with wood on DKP sheet (natural wood, lacquer, pvc , etc.)
The inside of the wing is filled with rock wool or isoglass.
Standard mono block lock system is applied. Optionally , semi-central or central locking system is used. 3 fixed steel pins are used on the hinge side of the wing.
Concealed safety clamp.
304 stainless steel or special aluminum profile is opnionally used on the wing frame.
Wide –angle binoculars.
Standard accessory.
It is made of 1.5 mm DKP sheet metal.
The case can be adjusted according to the desired dimensions.
Cases that are 20 cm or more will be custom made.
Frame surfaces and sills are wooden coated on DKP sheet. (Natural wood, lacquered, pvc . etc.)
Wing Type (Trapeze Section Wing)
Made of 0.90 mm + 0.90 mm = 1.8 mm DKP sheet.
Wing outer and inner surfaces are covered with wood on DKP sheet (natural wood, lacquer, pvc , etc.)
The inside of the wing is filled with rock wool or isoglass.
Standard mono block lock system is applied. Optionally , semi-central or central locking system is used. 3 fixed steel pins are used on the hinge side of the wing.
Concealed safety clamp.
304 stainless steel or special aluminum profile is opnionally used on the wing frame.
Wide –angle binoculars.
Standard accessory.
Lake Series
Case
It is made of 1.5 mm DKP sheet metal.
The case can be adjusted according to the desired dimensions.
Cases that are 20 cm or more will be custom made.
Frame surfaces and sills are wooden coated on DKP sheet. (Natural wood, lacquered, pvc . etc.)
Wing Type (Trapeze Section Wing)
Made of 0.90 mm + 0.90 mm = 1.8 mm DKP sheet.
Wing outer and inner surfaces are covered with wood on DKP sheet (natural wood, lacquer, pvc , etc.)
The inside of the wing is filled with rock wool or isoglass.
Standard mono block lock system is applied. Optionally , semi-central or central locking system is used.
3 fixed steel pins are used on the hinge side of the wing.
Concealed safety clamp.
304 stainless steel or special aluminum profile is opnionally used on the wing frame.
Wide –angle binoculars.
Standard accessory
It is made of 1.5 mm DKP sheet metal.
The case can be adjusted according to the desired dimensions.
Cases that are 20 cm or more will be custom made.
Frame surfaces and sills are wooden coated on DKP sheet. (Natural wood, lacquered, pvc . etc.)
Wing Type (Trapeze Section Wing)
Made of 0.90 mm + 0.90 mm = 1.8 mm DKP sheet.
Wing outer and inner surfaces are covered with wood on DKP sheet (natural wood, lacquer, pvc , etc.)
The inside of the wing is filled with rock wool or isoglass.
Standard mono block lock system is applied. Optionally , semi-central or central locking system is used.
3 fixed steel pins are used on the hinge side of the wing.
Concealed safety clamp.
304 stainless steel or special aluminum profile is opnionally used on the wing frame.
Wide –angle binoculars.
Standard accessory
Stone Veneer Series
Case
It is made of 1.5 mm DKP sheet metal.
The case can be adjusted according to the desired dimensions.
Cases that are 20 cm or more will be custom made.
Frame surfaces and sills are wooden coated on DKP sheet. (Natural wood, lacquered, pvc . etc.)
Wing Type (Trapeze Section Wing)
Made of 0.90 mm + 0.90 mm = 1.8 mm DKP sheet.
Wing outer and inner surfaces are covered with wood on DKP sheet (natural wood, lacquer, pvc , etc.)
The inside of the wing is filled with rock wool or isoglass.
Standard mono block lock system is applied. Optionally , semi-central or central locking system is used.
3 fixed steel pins are used on the hinge side of the wing.
Concealed safety clamp.
304 stainless steel or special aluminum profile is opnionally used on the wing frame.
Wide –angle binoculars.
Standard accessory.
It is made of 1.5 mm DKP sheet metal.
The case can be adjusted according to the desired dimensions.
Cases that are 20 cm or more will be custom made.
Frame surfaces and sills are wooden coated on DKP sheet. (Natural wood, lacquered, pvc . etc.)
Wing Type (Trapeze Section Wing)
Made of 0.90 mm + 0.90 mm = 1.8 mm DKP sheet.
Wing outer and inner surfaces are covered with wood on DKP sheet (natural wood, lacquer, pvc , etc.)
The inside of the wing is filled with rock wool or isoglass.
Standard mono block lock system is applied. Optionally , semi-central or central locking system is used.
3 fixed steel pins are used on the hinge side of the wing.
Concealed safety clamp.
304 stainless steel or special aluminum profile is opnionally used on the wing frame.
Wide –angle binoculars.
Standard accessory.
High Gloss Series
Case
It is made of 1.5 mm DKP sheet metal.
The case can be adjusted according to the desired dimensions.
Cases that are 20 cm or more will be custom made.
Frame surfaces and sills are wooden coated on DKP sheet. (Natural wood, lacquered, pvc . etc.)
Wing Type (Trapeze Section Wing)
Made of 0.90 mm + 0.90 mm = 1.8 mm DKP sheet.
Wing outer and inner surfaces are covered with wood on DKP sheet (natural wood, lacquer, pvc , etc.)
The inside of the wing is filled with rock wool or isoglass.
Standard mono block lock system is applied. Optionally , semi-central or central locking system is used.
3 fixed steel pins are used on the hinge side of the wing.
Concealed safety clamp.
304 stainless steel or special aluminum profile is opnionally used on the wing frame.
Wide –angle binoculars.
Standard accessory.
It is made of 1.5 mm DKP sheet metal.
The case can be adjusted according to the desired dimensions.
Cases that are 20 cm or more will be custom made.
Frame surfaces and sills are wooden coated on DKP sheet. (Natural wood, lacquered, pvc . etc.)
Wing Type (Trapeze Section Wing)
Made of 0.90 mm + 0.90 mm = 1.8 mm DKP sheet.
Wing outer and inner surfaces are covered with wood on DKP sheet (natural wood, lacquer, pvc , etc.)
The inside of the wing is filled with rock wool or isoglass.
Standard mono block lock system is applied. Optionally , semi-central or central locking system is used.
3 fixed steel pins are used on the hinge side of the wing.
Concealed safety clamp.
304 stainless steel or special aluminum profile is opnionally used on the wing frame.
Wide –angle binoculars.
Standard accessory.
PVC Series
Case
It is made of 1.5 mm DKP sheet metal.
The case can be adjusted according to the desired dimensions.
Cases that are 20 cm or more will be custom made.
Frame surfaces and sills are wooden coated on DKP sheet. (Natural wood, lacquered, pvc . etc.)
Wing Type (Trapeze Section Wing)
Made of 0.90 mm + 0.90 mm = 1.8 mm DKP sheet.
Wing outer and inner surfaces are covered with wood on DKP sheet (natural wood, lacquer, pvc , etc.)
The inside of the wing is filled with rock wool or isoglass.
Standard mono block lock system is applied. Optionally , semi-central or central locking system is used.
3 fixed steel pins are used on the hinge side of the wing.
Concealed safety clamp.
304 stainless steel or special aluminum profile is opnionally used on the wing frame.
Wide –angle binoculars.
Standard accessory.
It is made of 1.5 mm DKP sheet metal.
The case can be adjusted according to the desired dimensions.
Cases that are 20 cm or more will be custom made.
Frame surfaces and sills are wooden coated on DKP sheet. (Natural wood, lacquered, pvc . etc.)
Wing Type (Trapeze Section Wing)
Made of 0.90 mm + 0.90 mm = 1.8 mm DKP sheet.
Wing outer and inner surfaces are covered with wood on DKP sheet (natural wood, lacquer, pvc , etc.)
The inside of the wing is filled with rock wool or isoglass.
Standard mono block lock system is applied. Optionally , semi-central or central locking system is used.
3 fixed steel pins are used on the hinge side of the wing.
Concealed safety clamp.
304 stainless steel or special aluminum profile is opnionally used on the wing frame.
Wide –angle binoculars.
Standard accessory.
Economic Series
Colors may vary in digital and printed catalogues.
Please compare with the actual products in the sales points.
Please compare with the actual products in the sales points.
Aluminum Series
Colors may vary in digital and printed catalogues.
Please compare with the actual products in the sales points.
Please compare with the actual products in the sales points.
Villa Building Entrance Door Series
Case
It is made of 2 mm DKP sheet metal.
The case can be adjusted according to the desired dimensions.
Cases that are 20 cm or more will be custom made.
Frame surfaces and sills are wooden coated on DKP sheet. (Natural wood, lacquered, pvc . etc.)
Wing Type (Trapeze Section Wing)
Made of 0.90 mm + 0.90 mm = 1.8 mm DKP sheet.
Wing outer and inner surfaces are covered with wood on DKP sheet (natural wood, lacquer, pvc , etc.)
The inside of the wing is filled with rock wool or isoglass.
Standard mono block lock system is applied. Optionally , semi-central or central locking system is used.
3 fixed steel pins are used on the hinge side of the wing.
Concealed safety clamp.
304 stainless steel or special aluminum profile is opnionally used on the wing frame.
Wide –angle binoculars.
Standard accessory.
It is made of 2 mm DKP sheet metal.
The case can be adjusted according to the desired dimensions.
Cases that are 20 cm or more will be custom made.
Frame surfaces and sills are wooden coated on DKP sheet. (Natural wood, lacquered, pvc . etc.)
Wing Type (Trapeze Section Wing)
Made of 0.90 mm + 0.90 mm = 1.8 mm DKP sheet.
Wing outer and inner surfaces are covered with wood on DKP sheet (natural wood, lacquer, pvc , etc.)
The inside of the wing is filled with rock wool or isoglass.
Standard mono block lock system is applied. Optionally , semi-central or central locking system is used.
3 fixed steel pins are used on the hinge side of the wing.
Concealed safety clamp.
304 stainless steel or special aluminum profile is opnionally used on the wing frame.
Wide –angle binoculars.
Standard accessory.
Fire Door Series
Colors may vary in digital and printed catalogues.
Please compare with the actual products in the sales points.
Please compare with the actual products in the sales points.
interior Room Door Series
Colors may vary in digital and printed catalogues.
Please compare with the actual products in the sales points.
Please compare with the actual products in the sales points.
Wrought iron Series
Colors may vary in digital and printed catalogues.
Please compare with the actual products in the sales points.
Please compare with the actual products in the sales points.